Tutorials

From Internetworkpro

Contents 1 IOS 2 JunOS 3 dynamips/dynagen 4 Voice 5 Other 6 In Draft

[edit] IOS

• Configuring Cisco to work with a Windows NLB Cluster
• Use Kron Tab to run scheduled command - lessaid
• VRRP Configuration - lessaid
• generating actions based on OID status - swapon
• Generating_syslog_alarms_for_RTR/IP_SLA_probes
• Using Wildcard Masks - Kewlb
• Troubleshooting Firewalls - si-

[edit] JunOS

• Using QEMU with Olive to emulate Juniper Routers

[edit] dynamips/dynagen

• CCIE Security Home Lab with dynamips & Co einval
• Installing dynamips + dynagen + gns3 from source
• Using GNU Screen w/ dynamips/dynagen
• Using GNU Screen w/ dynamips/dynagen - danshtr way

[edit] Voice

• Converting a Cisco 7940G IP phone SCCP 8.x to SIP 8.x image - pello

[edit] Other

• Connecting to the console with cu
• Connecting to the console with minicom
• Connecting to the console with tip
• Connecting to the console with ckermit <-- tkup
• Using CiscoCD with linux - danshtr

[edit] In Draft

• Using named access lists
• Using cisco archive config options <-- nemith finish this
• Remote Triggered Black Hole Filtering - RTBH <-- nemith finish this
• MPLS with L3VPNs <-- nemith finish this
• Configuring IS-IS as your IP routing protocol <-- nemith finish this
• IP SLA Tracking for Routes <-- yet another one to complete by nemith.
• Subnetting 101 Dark3Lite